No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the Difference Between Interface-based CAR and Global CAR?

What Is the Difference Between Interface-based CAR and Global CAR?

Interface-based CAR limits the rate of packets on an interface. Global CAR limits the rate of packets on all interfaces of a specified LPU if the slot ID is specified, and limits the rate of packets on all interfaces of each LPU if the slot ID is not specified.

Assume that the CAR is 5000 kbit/s. If the CAR is applied to an interface, the maximum rate for the interface to receive and send packets is 5000 kbit/s. If the CAR is applied globally and the slot ID is not specified, the sum of the maximum rates of all the interfaces is 5000 kbit/s.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 19003

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next