No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Error "Add rule to chip failed" or Is Error "Adding rule failed" Is Frequently Reported When an ACL Rule Contains a TCP or UDP Port Range?

Why Error "Add rule to chip failed" or Is Error "Adding rule failed" Is Frequently Reported When an ACL Rule Contains a TCP or UDP Port Range?

The number of applied rules that contain "range" has reached or exceeded the maximum. The S series cards support 16 TCP or UDP port ranges and the E series cards support 32 TCP or UDP port ranges. When the number of ranges applied in the inbound direction exceeds the maximum, the preceding error is reported.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 18578

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next