No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Traffic Statistics

Overview of Traffic Statistics

Modular QoS Command-Line Interface (MQC) simplifies the QoS configuration. On devices with traffic statistics implemented utilizing MQC, statistics are collected about packets that match traffic classification rules. The statistics on forwarded and discarded packets matching a traffic policy help you check whether the traffic policy is correctly applied and locate faults.

You can run the display traffic policy statistics command to view the statistics on forwarded and discarded packets matching a traffic policy only when MQC is used to implement traffic statistics.

Table 8-1 describes the differences between traffic statistics and interface statistics and the commands used to view them.
Table 8-1  Differences between traffic statistics and interface statistics and the commands used to view them

Collection Mode

Display Command

Range

Remarks

Traffic statistics

display traffic policy statistics

Packets matching traffic classification rules after a traffic policy is applied

Packets sent to the CPU are not included.

Interface statistics

display interface

All packets on an interface

Packets sent to the CPU are included.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 18318

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next