No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Mapping Between Flow Queues and Interface Queues

(Optional) Configuring the Mapping Between Flow Queues and Interface Queues


The mapping between flow queues and port queues allows the device to flexibly send service traffic in a flow queue to a port queue. Then the device can deliver differentiated services for the same service traffic from different users.


  1. Run system-view

    The system view is displayed.

  2. Run flow-mapping-profile flow-mapping-profile-name

    A flow mapping profile is created or the view of an existing flow mapping profile is displayed.

    By default, the system predefines a flow mapping profile default. This flow mapping profile cannot be modified or deleted.

  3. Run map flow-queue flow-queue-index to port-queue port-queue-index

    The mapping between flow queues and port queues is configured.

    To adjust the mapping between flow queues and port queues, perform the preceding configurations. If the preceding configurations are not performed, a subscriber queue references the flow mapping profile default.

Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 18294

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next