No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Traffic Statistics on Subscriber Queues

Displaying Traffic Statistics on Subscriber Queues

Context

After subscriber queues are configured to implement HQoS, to learn forwarded and discarded packets in each flow queue of subscriber queues, run the following commands to view traffic statistics based on matched ACL rules.

Procedure

  • Run the display traffic-user-queue statistics interface interface-type interface-number outbound acl { bas-acl | adv-acl } [ acl { l2-acl | name acl-name } ] command to check traffic statistics on subscriber queues.
  • Run the display traffic-user-queue statistics interface interface-type interface-number outbound acl l2-acl [ acl { bas-acl | adv-acl | name acl-name } ] command to check traffic statistics on subscriber queues.
  • Run the display traffic-user-queue statistics interface interface-type interface-number outbound acl name name-acl [ acl { bas-acl | adv-acl | l2-acl | name acl-name } ] command to check traffic statistics on subscriber queues.
  • Run the display traffic-user-queue statistics interface interface-type interface-number outbound acl ipv6 { bas-acl | adv-acl | name acl-name } command to check traffic statistics on subscriber queues.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 18508

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next