No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Mappings Between Local Priorities and Queues

(Optional) Configuring the Mappings Between Local Priorities and Queues


The switch sends packets to the specified queue based on the mappings between local priorities and queues.


X series cards do not support the mapping configuration between local priorities and queues.


  1. Run system-view

    The system view is displayed.

  2. Run qos local-precedence-queue-map local-precedence queue-index

    The mapping between local priorities and queues is configured.

    The mappings between local priorities and queues take effect only on the inbound interface. That is, traffic enters queues based on the mappings.

Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 18539

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next