No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - QoS

This document describes the configurations of QoS functions, including MQC, priority mapping, traffic policing, traffic shaping, interface-based rate limiting, congestion avoidance, congestion management, packet filtering, redirection, traffic statistics, ACL-based simplified traffic policy, and HQoS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring ACL-based Traffic Statistics

Configuring ACL-based Traffic Statistics

Context

ACL-based traffic statistics allows the device to collect statistics on packets matching an ACL.

Procedure

  • Configuring ACL-based traffic statistics globally or in a VLAN
    1. Run system-view

      The system view is displayed.

    2. Run the following commands as required.

      • Run traffic-statistic [ vlan vlan-id ] inbound acl { bas-acl | adv-acl | name acl-name | l2-acl } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching an ACL.

      • Run traffic-statistic [ vlan vlan-id ] inbound acl { ipv6 { bas-acl | adv-acl | name acl-name } | user-acl } [ rule rule-id ] [ by-bytes ]

        The device is configured to collect statistics on incoming packets matching an ACL.

      • Run traffic-statistic [ vlan vlan-id ] outbound acl { [ ipv6 ] { bas-acl | adv-acl | name acl-name } | l2-acl | user-acl } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching an ACL.

      • Run traffic-statistic [ vlan vlan-id ] inbound acl l2-acl [ rule rule-id ] acl { bas-acl | adv-acl | name acl-name } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic [ vlan vlan-id ] inbound acl { bas-acl | adv-acl } [ rule rule-id ] acl { l2-acl | name acl-name } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic [ vlan vlan-id ] inbound acl name acl-name [ rule rule-id ] acl { bas-acl | adv-acl | l2-acl | name acl-name } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic [ vlan vlan-id ] outbound acl l2-acl [ rule rule-id ] acl { bas-acl | adv-acl | name acl-name } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic [ vlan vlan-id ] outbound acl { bas-acl | adv-acl } [ rule rule-id ] acl { l2-acl | name acl-name } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic [ vlan vlan-id ] outbound acl name acl-name [ rule rule-id ] acl { bas-acl | adv-acl | l2-acl | name acl-name } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching Layer 2 and Layer 3 ACLs.

  • Configuring ACL-based traffic statistics on an interface
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run the following commands as required.

      • Run traffic-statistic inbound acl { bas-acl | adv-acl | name acl-name | l2-acl } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching an ACL.

      • Run traffic-statistic inbound acl { ipv6 { bas-acl | adv-acl | name acl-name } | user-acl } [ rule rule-id ] [ by-bytes ]

        The device is configured to collect statistics on incoming packets matching an ACL.

      • Run traffic-statistic outbound acl { [ ipv6 ] {bas-acl | adv-acl | name acl-name } | l2-acl } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching an ACL.

      • Run traffic-statistic inbound acl l2-acl [ rule rule-id ] acl { bas-acl | adv-acl | name acl-name } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic inbound acl { bas-acl | adv-acl } [ rule rule-id ] acl { l2-acl | name acl-name } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic inbound acl name acl-name [ rule rule-id ] acl { bas-acl | adv-acl | l2-acl | name acl-name } [ rule rule-id ] [ by-bytes ] [ secure ]

        The device is configured to collect statistics on incoming packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic outbound acl l2-acl [ rule rule-id ] acl { bas-acl | adv-acl | name acl-name } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic outbound acl { bas-acl | adv-acl } [ rule rule-id ] acl { l2-acl | name acl-name } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching Layer 2 and Layer 3 ACLs.

      • Run traffic-statistic outbound acl name acl-name [ rule rule-id ] acl { bas-acl | adv-acl | l2-acl | name acl-name } [ rule rule-id ]

        The device is configured to collect statistics on outgoing packets matching Layer 2 and Layer 3 ACLs.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065653

Views: 18728

Downloads: 45

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next