No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Reliability

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Smart Link and Monitor Link

Licensing Requirements and Limitations for Smart Link and Monitor Link

Involved Network Elements

Other network elements are required to support Smart Link and Monitor Link functions.

Licensing Requirements

Smart Link and Monitor Link are basic features of a switch and are not under license control.

Association between Smart Link and VPLS or VLL can be only used on the device enabled with MPLS. MPLS requires a license. By default, MPLS of a newly purchased device is disabled. To use MPLS, apply for and purchase the license from the equipment supplier.

For details about how to apply for a license, see Obtaining Licenses in the S12700 Series Agile Switches License Usage Guide.

Version Requirements

Table 6-3  Products and versions supporting Smart Link and Monitor Link
Product Product Model Version

S12700

S12708 and S12712

V200R005C00, V200R006C00, V200R007C00, V200R007C20, V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S12710

V200R010C00, V200R011C10, V200R012C00, V200R013C00

S12704

V200R008C00, V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • On the SA series cards, Smart Link cannot be configured to notify the VPLS or VLL module of link switching.

  • On the switch XGE interface connected to the ACU2, ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, or ET1D2FW00S02 card, Smart Link cannot be configured to notify the VPLS or VLL module of link switching.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065654

Views: 37793

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next