No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Configuration Guide - Reliability

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Mode in Which VRRP Advertisement Packets Are Sent in a Super-VLAN

(Optional) Setting the Mode in Which VRRP Advertisement Packets Are Sent in a Super-VLAN

Context

When a VRRP group is configured in a super-VLAN, configure VRRP Advertisement packets to be sent to a specified sub-VLAN. This configuration ensures that Advertisement packets are not broadcast in all sub-VLANs, reducing the demand for network bandwidth.

Prerequisites

A super-VLAN has been configured.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface vlanif vlan-id

    The VLANIF interface view is displayed.

  3. Run vrrp advertise send-mode { sub-vlan-id | all }

    A mode in which VRRP Advertisement packets are sent in a super-VLAN is set.

    By default, the master sends VRRP Advertisement packets to a sub-VLAN that is Up and has the smallest VLAN ID in a super-VLAN.

    • If sub-vlan-id is specified, the master sends VRRP Advertisement packets to a specified sub-VLAN.

    • If all is specified, the master broadcasts VRRP Advertisement packets to all sub-VLANs of a super-VLAN.

    NOTE:

    If all is specified, the master broadcasts VRRP Advertisement packets to all sub-VLANs of a super-VLAN, increasing the CPU usage. Therefore, do not specify all.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065654

Views: 27334

Downloads: 27

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next