No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Configuration Guide - Reliability

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VRRP Load Balancing

VRRP Load Balancing

In load balancing mode, multiple devices transmit service traffic simultaneously. Therefore, the load balancing mode requires two or more virtual routers. Each virtual router contains one master and multiple backups, and the master in each virtual router can be different.

VRRP active/standby and load balancing modes are similar in terms of implementation and packet negotiation processes. The load balancing mode differs from the active/standby mode in the following ways:
  • Multiple VRRP groups need to be created, and the master in each VRRP group can be different.
  • A VRRP device can join multiple VRRP groups and has different priorities in different VRRP groups.

For an implementation example, see Using VRRP to Implement Load Balancing.

Updated: 2019-04-08

Document ID: EDOC1100065654

Views: 37113

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next