No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Configuration Guide - Reliability

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for NSR

Licensing Requirements and Limitations for NSR

Involved Network Elements

Other network elements are not required.

Licensing Requirements

NSR is a basic feature of a switch and is not under license control.

Version Requirements

Table 4-2  Products and versions supporting NSR
Product Product Model Version


S12708 and S12712

V200R010C00, V200R011C10, V200R012C00, V200R013C00


V200R010C00, V200R011C10, V200R012C00, V200R013C00


V200R010C00, V200R011C10, V200R012C00, V200R013C00
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

NSR has the following limitations:
  • The switchover time is not strictly controlled, because the switchover time is not the key performance index after the active/standby switchover of MPUs.
  • NSR cannot ensure high reliability of the system that has only one MPU.
  • If a fault occurs in the main process before the batch backup is complete, the slave process, whose status is unknown and is not switchable, cannot function as the main process.
  • The system enabled with NSR does not support system-level GR or ISSU.
  • On the device that performs the active/standby switchover of MPUs, the system supports two HA protection mechanisms: NSR and GR. NSR and GR cannot be used simultaneously. That is, during the active/standby switchover of MPUs, the system can use either NSR or GR for a specific protocol. When being deployed with NSR, a device can keep its neighbor relationship so that the device can help its neighbor complete GR. This ensures HA of services on all nodes of a network to maximum extent.
Updated: 2019-04-08

Document ID: EDOC1100065654

Views: 32891

Downloads: 29

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next