No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap provision

display ap provision

Function

The display ap provision command displays the configurations for an AP to go online.

Format

display ap provision ap-id ap-id

Parameters

Parameter Description Value
ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After you set parameters for an AP to go online in the AP view, you can run this command to view the detailed configuration.

Example

# Display configurations in the AP provisioning view.

<HUAWEI> display ap provision ap-id 2
-------------------------------------------------------------------------------- 
AP name               : 70d9-313c-3120 
AP group              : default 
AP address mode       : static 
IPv4 address          : - 
IPv4 mask address     : - 
IPv4 gateway address  : - 
IPv4 AC list          : - 
-------------------------------------------------------------------------------- 
Table 11-25  Description of the display provision-ap parameter-list command output

Item

Description

AP name

AP name.

To configure this parameter, run the ap-name (AP view) command.

AP group

AP group to which an AP belongs.

To configure this parameter, run the ap-group (AP view) command.

AP address mode

Mode in which an AP obtains an IP address.

To configure this parameter, run the address-mode (AP view) command.

IPv4 address

Static IPv4 address of an AP.

To configure this parameter, run the ip-address (AP view) command.

IPv4 mask address

Static IPv4 mask of an AP.

To configure this parameter, run the ip-address (AP view) command.

IPv4 gateway address

IPv4 gateway address of an AP.

To configure this parameter, run the ip-address (AP view) command.

IPv4 AC list

AC IPv4 address list for APs.

To configure this parameter, run the ac-list (AP view) command.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116034

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next