No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ht a-mpdu disable

ht a-mpdu disable

Function

The ht a-mpdu disable command disables aggregation of MPDUs.

The undo ht a-mpdu disable command enables aggregation of MPDUs.

By default, aggregation of MPDUs is enabled.

Format

ht a-mpdu disable

undo ht a-mpdu disable

Parameters

None

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

To reduce cost, 802.11n uses frame aggregation technology that aggregates two or more frames into an A-MPDU to transmit.

Example

# Disable aggregation of MPDUs.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] ht a-mpdu disable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113118

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next