No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wds-profile (AP group radio view or AP radio view)

wds-profile (AP group radio view or AP radio view)

Function

The wds-profile command binds a WDS profile to an AP radio.

The undo wds-profile command unbinds a WDS profile from an AP radio.

By default, no WDS profile is bound to an AP radio.

Format

wds-profile profile-name

undo wds-profile

Parameters

Parameter

Description

Value

profile-name

Specifies the name of the WDS profile bound to an AP radio.

The WDS profile must exist.

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a WDS profile is bound to an AP radio, the radio will generate a WDS VAP to provide WDS services. The WDS VAP provides hidden SSIDs for WDS nodes to set up connections.

Prerequisites

A WDS profile has been created and configured properly.

Precautions

Among the VAPs created after a WDS profile is bound to an AP radio, the VAPs with the WLAN IDs 13 and 14 cannot be occupied.

An AP radio can only have one WDS profile bound.

This command has the same function as the wds-profile radio command. You can use either of them.

Example

# Bind the WDS profile test to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] radio 0
[HUAWEI-wlan-group-radio-group1/0] wds-profile test
Warning: This action may cause service interruption. Continue?[Y/N]y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114373

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next