No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
member (mobility group view)

member (mobility group view)

Function

The member command adds a member AC to a mobility group.

The undo member command deletes a member AC from a mobility group.

By default, no member AC is added to a mobility group.

Format

member ip-address ipv4-address [ description description ]

undo member ip-address ipv4-address

Parameters

Parameter

Description

Value

ip-address ipv4-address

Specifies the IPv4 address of a mobility group member.

The value is in dotted decimal notation.

description description

Description of a mobility group member.

The value is a string of 1 to 31 case-sensitive characters without spaces.

Views

mobility group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To enable a STA to roam between ACs, run the mobility-group name group-name command to configure a mobility group. The STA can roam between the ACs in the group. You can run the member command to add a member AC to the mobility group.

Precautions

A maximum of 16 ACs can be added to a mobility group. An AC can be added only to one mobility group.

Example

# Add the AC with IPv4 address 192.168.100.1 to the mobility group mobility.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mobility-group name mobility
[HUAWEI-mc-mg-mobility] member ip-address 192.168.100.1

# Remove the AC with IPv4 address 192.168.100.1 from the mobility group mobility.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mobility-group name mobility
[HUAWEI-mc-mg-mobility] undo member ip-address 192.168.100.1
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113884

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next