No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
smart-antenna throughput-triggered-training

smart-antenna throughput-triggered-training

Function

The smart-antenna throughput-triggered-training command sets a sudden performance change threshold that triggers smart antenna training.

The undo smart-antenna throughput-triggered-training command restores the default sudden performance change threshold that triggers smart antenna training.

The default sudden performance change threshold that triggers smart antenna training is 10%.

Format

smart-antenna throughput-triggered-training threshold threshold

undo smart-antenna throughput-triggered-training threshold

Parameters

Parameter

Description

Value

threshold threshold

Specifies a sudden performance change threshold that triggers antenna training.

The value is an integer that ranges from 10 to 50, in percentage. In addition, the value must be a multiple of 10.

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

In a smart antenna system, the device monitors performance (throughput) of transmit ends. If the detected throughput of a transmit end exceeds the sudden performance change threshold specified using the smart-antenna throughput-triggered-training command, a new round of antenna training is triggered.
  • In a good air interface environment, set a high sudden performance change threshold to prevent frequent antenna training from affecting user services.
  • In a poor air interface environment, set a low sudden performance change threshold to improve the WLAN's anti-interference capability.

Example

# Set the sudden performance change threshold that triggers antenna training to 10%.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] radio-2g-profile name default
[HUAWEI-wlan-radio-2g-prof-default] smart-antenna throughput-triggered-training threshold 10
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113008

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next