No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp trust port (WDS profile view)

dhcp trust port (WDS profile view)


The dhcp trust port command enables a DHCP trusted port in a WDS profile.

The undo dhcp trust port command disables a DHCP trusted port in a WDS profile.

By default, a DHCP trusted port is enabled in a WDS profile.


dhcp trust port

undo dhcp trust port




WDS profile view

Default Level

2: Configuration level

Usage Guidelines

After a DHCP trusted port is enabled in a WDS profile and the WDS profile is applied to an AP, the AP receives the DHCP OFFER, ACK, and NAK packets sent by authorized DHCP servers and forwards the packets to STAs so that the STAs can obtain valid IP addresses and go online.


# Enable a DHCP trusted port in the WDS profile test.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wds-profile name test 
[HUAWEI-wlan-wds-prof-test] dhcp trust port
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123211

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next