No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap blacklist

ap blacklist

Function

The ap blacklist command adds an AP to an AP blacklist.

The undo ap blacklist command deletes APs from an AP blacklist.

By default, no AP is in an AP blacklist.

Format

ap blacklist mac ap-mac1 [ to ap-mac2 ]

undo ap blacklist { mac ap-mac1 [ to ap-mac2 ] | all }

Parameters

Parameter

Description

Value

mac ap-mac1

Specifies the AP MAC address.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

to ap-mac2

Specifies the end MAC address. This parameter is used when you want to add multiple MAC addresses to the blacklist. The value must be larger than ap-mac1. ap-mac1 and ap-mac2 identify a range.

The maximum number of MAC addresses that can be added to the blacklist in batches is 128.

The value is in H-H-H format. An H is a hexadecimal number of 4 digits.

all

Deletes all MAC addresses from the blacklist.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the AP's MAC address is in the blacklist, the AP cannot go online. If the MAC address of an online AP is in the blacklist, the AP is forced to log out.

Precautions

The AP blacklist and whitelist can be configured at the same time. However, the MAC address of an AP cannot be added to the AP blacklist and whitelist at the same time.

If AP whitelist and blacklist are all configured, check whether an AP is on the blacklist first.

Example

# Add the AP with the MAC address of 0025-9e07-8280 to the AP blacklist.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap blacklist mac 0025-9e07-8280

# Add MAC addresses from 0025-9e07-8270 to 0025-9e07-8276 to the AP blacklist.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap blacklist mac 0025-9e07-8270 to 0025-9e07-8276
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127307

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next