No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
undo ap

undo ap


The undo ap command deletes an AP.


undo ap { ap-name ap-name | ap-id ap-list | ap-mac ap-mac | ap-group group-name | all }





ap-name ap-name

Deletes the AP with the specified AP name.

The AP name must exist.

ap-id ap-list

Deletes APs with the specified IDs in a batch.

The value is a string of 1 to 255 characters. When multiple APs are selected, use commas (,) or hyphens (-) to separate AP IDs. For example, 5,8,10-13,20 indicates the list of APs with IDs 5, 8, 10, 11, 12, 13, and 20.

ap-mac ap-mac

Deletes the AP with the specified MAC address.

The AP's MAC address must exist.

ap-group group-name

Deletes the AP in a specified AP group.

The AP group must exist.


Deletes all APs.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Application Scenario

If you do not want a specified AP to go online on the AC, run the command to delete the AP from the AC. After the AP is deleted, the AP goes offline from the AC.

Configuration Impact

Deleting an AP will interrupt services of STAs connected to the AP.


If an AP is upgraded, in standby state, or the ap-ping command is executed, the AP cannot be deleted.


# Delete the AP named Area_1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] undo ap ap-name Area_1
Warning: Deleting the AP will interrupt user services. Continue?[Y/N]:y
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126902

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next