No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap data-collection interval

ap data-collection interval


The ap data-collection interval command sets the data buffer duration.

The undo ap data-collection interval command restores the default data buffer duration.

By default, an AC buffers AP data for 5 minutes.


ap data-collection interval interval

undo ap data-collection interval






Specifies the buffer duration.

The value is an integer that ranges from 5 to 60, in minutes.


WLAN view

Default Level

2: Configuration level

Usage Guidelines

You can run the ap data-collection interval command to set the buffer duration.


# Enable an AC to buffer AP data and set the buffer duration.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap data-collection enable
[HUAWEI-wlan-view] ap data-collection interval 57
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116602

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next