No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
regulatory-domain-profile

regulatory-domain-profile

Function

The regulatory-domain-profile command binds a regulatory domain profile to an AP or AP group.

The undo regulatory-domain-profile command unbinds a regulatory domain profile from an AP or AP group.

By default, the regulatory domain profile default is bound to an AP group, but no regulatory domain profile is bound to an AP. In the default regulatory domain profile, the country code is China, 2.4G calibration channels include channels 1, 6, and 11, 5G calibration channels include channels 149, 153, 157, 161, and 165, the 5G calibration bandwidth is 20 MHz, and the wideband function is disabled.

Format

regulatory-domain-profile profile-name

undo regulatory-domain-profile

Parameters

Parameter

Description

Value

profile-name

Specifies the name of a regulatory domain profile.

The regulatory domain profile must exist.

Views

AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create a regulatory domain profile using the regulatory-domain-profile (WLAN view) command, bind it to an AP or AP group so that the regulatory domain profile can take effect.

Precautions

After a regulatory domain profile is bound to an AP or AP group, parameter settings in the regulatory domain profile apply to all APs using the profile.

Example

# Create the regulatory domain profile domain1 and bind it to AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] regulatory-domain-profile name domain1
[HUAWEI-wlan-regulate-domain-domain1] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] regulatory-domain-profile domain1
Warning: Modifying the country code will clear channel, power and antenna gain configurations of the radio and reset the AP. Continu
e?[Y/N]:y 
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126489

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next