No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The management-server command configures a host computer.

The undo management-server command deletes the host computer configuration.

By default, no host computer is configured.


management-server { domain domain-name | server-ip server-ip } server-port server-port-num [ ext-channel ]

undo management-server { domain domain-name | server-ip server-ip } server-port server-port-num [ ext-channel ]





domain domain-name

Specifies the domain name of a host computer.

The value is a string of 1 to 63 case-insensitive characters without spaces. The value contains letters, digits, and underscores (_) or dots (.).
server-ip server-ip

Specifies the IP address of a host computer.

The value is in dotted decimal notation.

server-port server-port-num

Specifies the port number of a host computer.

The value is an integer that ranges from 1 to 65535.


Specifies an extension channel.



IoT profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An AP functions as a server or client to communicate with a host computer in bi-directional mode. When the AP reports data to the host computer, the AP functions as a client and the host computer functions as a server. When the AP receives data from the host computer, the AP functions as a server and the host computer functions as a client. The domain name/IP address and one port of at least one host computer must be configured. Otherwise, serial data reported by the AP will be discarded.


You can configure multiple host computers. An RFID card of the common type supports a maximum of four host computers. After four host computers have been configured, you need to delete a host computer before adding a new host computer. Host computers can only be deleted or added, but cannot be modified. An IoT card of the cas-edu type supports only one host computer.

When a ZigBee card is used, information about two host computers must be configured. The channel of the second host computer is an extension channel specified by the ext-channel parameter. Only one extended channel can be configured. The two channels cannot be configured with the same port number and IP address, or the same port number and domain name.

When multiple host computers are configured, the device automatically select one available host computer for link establishment rather than establish links with multiple host computers.


# Configure an IP address and a port number for a host computer.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] iot-profile name profile1
[HUAWEI-wlan-iot-prof-profile1] management-server server-ip server-port 3000
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124715

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next