No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
provision-ap

provision-ap

Function

The provision-ap command displays the AP provisioning view.

Format

provision-ap

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

In the AP provisioning view, you can configure provisioning parameters of APs, including the management VLAN, static IP address, gateway, and AC list, which facilitates remote AP management on the AC.

Example

# Display the AP provisioning view.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] provision-ap
[HUAWEI-wlan-provision-ap]
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113007

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next