No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset wlan non-wifi-device

reset wlan non-wifi-device

Function

The reset wlan non-wifi-device command clears information about detected non-Wi-Fi devices.

Format

reset wlan non-wifi-device { all | { ap-name ap-name | ap-id ap-id } radio radio-id }

Parameters

Parameter

Description

Value

all

Clears information about the non-Wi-Fi devices detected by all APs.

-

ap-name ap-name

Clears information about the non-Wi-Fi devices detected by a specified AP name.

The AP name must already exist.
ap-id ap-id

Clears information about the non-Wi-Fi devices detected by a specified AP ID.

The AP ID must already exist.

radio radio-id

Clears information about the non-Wi-Fi devices detected by a specified AP radio.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.

Views

All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

Before recollecting information about detected non-Wi-Fi devices in a period, you can run the reset command to clear existing information so that the AC can recollect information.

Prerequisites

The spectrum analysis function has been enabled on a radio.

Impact

The cleared non-Wi-Fi device information cannot be restored. Exercise caution when you use the reset command. After the command is run, you can run the display wlan non-wifi-device history command to view related information.

Example

# Clear information about the non-Wi-Fi devices detected by all APs.

<HUAWEI> reset wlan non-wifi-device all
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126949

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next