No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
vap-profile (WLAN view)

vap-profile (WLAN view)

Function

The vap-profile command creates a VAP profile and displays the VAP profile view, or displays the view of an existing VAP profile.

The undo vap-profile command deletes a VAP profile.

By default, the system provides the VAP profile default.

Format

vap-profile name profile-name

undo vap-profile { name profile-name | all }

Parameters

Parameter

Description

Value

name profile-name

Specifies the name of a VAP profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

all

Deletes all VAP profiles.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a radio profile is applied in the AP group view, AP view, AP radio view, or AP group radio view, the AP can transmit and receive radio signals. After a VAP profile is applied in the AP group view, AP view, AP radio view, or AP group radio view, VAPs are generated and provide wireless access services for STAs. You can configure parameters in the VAP profile to enable APs to provide different wireless services.

Follow-up Procedure

Run the vap-profile command to apply the VAP profile in the AP group view, AP view, AP radio view, or AP group radio view so that the VAP profile can take effect.

Precautions

  • The VAP profile default cannot be deleted.

  • The VAP profile referenced in the AP group view, AP view, AP radio view, or AP group radio view cannot be deleted. To delete the VAP profile, unbind it from the AP group view, AP view, AP radio view, or AP group radio view first.

  • By default, the SSID profile default, security profile default, and traffic profile default are bound to a VAP profile.

Example

# Create a VAP profile vap1 and enter the VAP profile view.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] 
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114644

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next