No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap wired-port

display ap wired-port

Function

The display ap wired-port command displays AP wired interface configuration.

Format

display ap wired-port interface-type interface-number { ap-name ap-name | ap-id ap-id }

Parameters

Parameter

Description

Value

interface-type interface-number

Specifies the type and number of an AP wired interface.

The interface type and number need to be selected according to the actual device.

ap-name ap-name

Specifies an AP name.

The AP name must exist.

ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can use this command to view configurations on the AP wired interface.

Example

# Display GE interface configuration of AP huawei.

<HUAWEI> display ap wired-port gigabitethernet 0 ap-name huawei
--------------------------------------------------------------------------------
Wired port number             : 0
Wired port type               : GigabitEthernet
Wired port description        :
Wired port STP                : disable
Wired port user isolate       : disable
Wired port PVID VLAN          : -
Wired port VLAN tagged        : -
Wired port VLAN untagged      : -
Wired port Eth-trunk          : -
Wired port LLDP               : enable
Wired port LLDP basic TLV management address: enable
Wired port LLDP basic TLV port description  : enable
Wired port LLDP basic TLV system capability : enable
Wired port LLDP basic TLV system description: enable
Wired port LLDP basic TLV system name       : enable
Wired port CRC warn switch    : No
Wired port CRC warn high threshold : 50
Wired port CRC warn low threshold  : 20
--------------------------------------------------------------------------------
Traffic Type                        Direction  AppliedRecord                            
----------------------------------------------------------------------------------------
traffic-filter                      inbound    IPv4 ACL 3012                            
----------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
Traffic Type                        Direction  RemarkType  RemarkValue  AppliedRecord    
----------------------------------------------------------------------------------------
traffic-remark                      outbound   802.1p      2            IPv6 ACL 3011    
------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Table 11-44  Description about the display ap wired-port gigabitethernet 0 ap-name command output

Item

Description

Wired port number Number of the wired interface.
Wired port type Type of the wired interface.
Wired port description Description of the wired interface.
Wired port workmode Mode of the wired interface.
Wired port STP Whether to enable STP on the wired interface.
Wired port user isolate Whether to enable user isolation on the wired interface.
Wired port PVID VLAN PVID of the wired interface.
Wired port VLAN tagged VLAN to which the interface is added in tagged mode.
Wired port VLAN untagged VLAN to which the interface is added in untagged mode.
Wired port Eth-trunk Trunk ID to which the wired interface is bound.
Wired port LLDP Whether to enable LLDP on the wired interface.
Wired port LLDP basic TLV management address Management IP address of the wired interface.
Wired port LLDP basic TLV port description Wired interface description.
Wired port LLDP basic TLV system capability Wired interface capability set.
Wired port LLDP basic TLV system description Wired interface system description.
Wired port LLDP basic TLV system name Wired interface system name.
Wired port CRC warn switch Whether to enable the alarm function for CRC errors on the wired interface.
Wired port CRC warn high threshold Upper alarm threshold for CRC errors on the wired interface.
Wired port CRC warn low threshold Lower alarm threshold for CRC errors on the wired interface.
Wired port IPv4 inbound ACL number IPv4-based ACL in the inbound direction.
Wired port IPv4 outbound ACL number IPv4-based ACL in the outbound direction.
Traffic Type ACL-based packet filtering and re-marking implemented by the AP wired port.
  • traffic-filter
  • traffic-remark
Direction Incoming or outgoing packets.
AppliedRecord IPv4/IPv6/L2 packet filtering and re-marking based on ACLs.
RemarkType Protocol type.
  • dscp
  • dot1p
RemarkValue Protocol type value.
  • dscp: 0-63
  • dot1p: 0-7

# Display Eth-trunk interface configuration of AP huawei.

<HUAWEI> display ap wired-port eth-trunk 0 ap-name huawei
------------------------------------------------------------------------------
Eth-trunk ID                        : 0
Eth-trunk description               : -
STP                                 : disable
User isolate                        : disable
PVID VLAN                           : -
VLAN tagged                         : -
VLAN untagged                       : -
--------------------------------------------------------------------------------
Traffic Type                        Direction  AppliedRecord                            
----------------------------------------------------------------------------------------
traffic-filter                      inbound    IPv4 ACL 3012                            
----------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
Traffic Type                        Direction  RemarkType  RemarkValue  AppliedRecord    
----------------------------------------------------------------------------------------
traffic-remark                      outbound   802.1p      2            IPv6 ACL 3011    
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------
Table 11-45  Description about the display ap wired-port eth-trunk 0 ap-name command output

Item

Description

Eth-trunk ID ID of the Eth-trunk interface.
Eth-trunk description Description of the Eth-trunk interface.
STP Whether to enable STP on the Eth-trunk interface.
User isolate Whether to enable user isolation on the Eth-trunk interface.
PVID VLAN PVID of the Eth-trunk interface.
VLAN tagged VLAN to which the Eth-trunk interface is added in tagged mode.
VLAN untagged VLAN to which the Eth-trunk interface is added in untagged mode.
Traffic Type ACL-based packet filtering and re-marking implemented by the AP wired port.
  • traffic-filter
  • traffic-remark
Direction Incoming or outgoing packets.
AppliedRecord IPv4/IPv6/L2 packet filtering and re-marking based on ACLs.
RemarkType Protocol type.
  • dscp
  • dot1p
RemarkValue Protocol type value.
  • dscp: 0-63
  • dot1p: 0-7
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115545

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next