No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
config-agent permit ip-address

config-agent permit ip-address

Function

The config-agent permit ip-address command configures trusted host computers.

The undo config-agent permit ip-address command deletes the configuration of trusted host computers.

By default, no trusted host computer is configured.

Format

config-agent permit ip-address ip-address { net-mask | mask-len }

undo config-agent permit ip-address

Parameters

Parameter

Description

Value

ip-address

Specifies the IP address of a trusted host computer.

The value is in dotted decimal notation.

net-mask

Specifies the mask of the IP address of a trusted host computer.

The value is in dotted decimal notation.

mask-len

Specifies the mask length.

The value is an integer that ranges from 0 to 32.

Views

IoT profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To prevent unauthorized devices from attacking an AP, you can configure trusted host computers. In this way, only hosts within the specified IP address range can communicate with the AP functioning as a server and send the AP the configuration to be delivered to the IoT card.

If no trusted host computer is configured, any host computers with reachable routes to the AP can communicate with the AP, which brings security risks to the AP.

Precautions

After the type cas-edu command is executed to set the card type to cas-edu, the config-agent permit ip-address command cannot be executed.

Example

# Configure the IP address of a trusted host computer and its mask.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] iot-profile name wlan-iot
[HUAWEI-wlan-iot-prof-wlan-iot] config-agent permit ip-address 10.2.3.4 255.255.255.0
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113895

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next