No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
keepalive (WMI profile view)

keepalive (WMI profile view)

Function

The keepalive command configures connection parameters between APs and the WMI server.

The undo keepalive command restores the default settings of connection parameters between APs and the WMI server.

By default, the heartbeat interval is 3 minutes, the reconnection interval is 5 minutes, and the number of reconnection attempts is 0.

Format

keepalive { interval interval | retry-interval retry-interval | retry-number retry-number } *

undo keepalive

Parameters

Parameter Description Value
interval interval Specifies the heartbeat interval. The value is an integer that ranges from 1 to 60, in minutes.
retry-interval retry-interval Specifies the reconnection interval after an AP is disconnected from the server. The value is an integer that ranges from 5 to 60, in minutes.
retry-number retry-number Specifies the number of reconnection attempts. The value is an integer that ranges from 0 to 4294967295.

The value 0 indicates that the server and APs always attempt to reconnect to each other.

Views

WMI profile view

Default Level

2: Configuration level

Usage Guidelines

None

Example

# Set the number of reconnection attempts to 5.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wmi-server name abc
[HUAWEI-wlan-wmi-server-prof-abc] keepalive retry-number 5
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127721

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next