No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rssi-diff-gap

rssi-diff-gap

Function

The rssi-diff-gap command sets the RSSI difference threshold of members in a static load balancing group.

The undo rssi-diff-gap command restores the default RSSI difference threshold of members in a static load balancing group.

By default, the RSSI difference threshold of members in a static load balancing group is 5 dB.

Format

rssi-diff-gap diff-gap-threshold

undo rssi-diff-gap

Parameters

Parameter

Description

Value

diff-gap-threshold

Specifies the RSSI difference threshold of members in a static load balancing group.

The value is an integer that ranges from 0 to 15, in dB.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To achieve load balancing, an AP may migrate connected STAs to other APs with smaller RSSIs. If the RSSI of the AP with which a STA currently associates minus the RSSI of the target AP is larger than the specified RSSI difference threshold, the STA is denied from being migrated to the target AP; otherwise, the STA can be migrated to the target AP.

Precautions

If STAs have high signal quality deterioration tolerance for the target AP, you can set a larger RSSI difference threshold to achieve better load balancing effect. If STAs have low signal quality deterioration tolerance for the target AP, set a smaller RSSI difference threshold. You are advised to retain the default value.

This command is valid only in sta-number mode.

Example

# Set the RSSI difference threshold of members in a static load balancing group to 6 dB.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] rssi-diff-gap 6
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127293

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next