No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize bcmc unicast-send mismatch-action drop

traffic-optimize bcmc unicast-send mismatch-action drop

Function

The traffic-optimize bcmc unicast-send mismatch-action drop command discards broadcast or multicast packets that fail to be converted into unicast packets on air interfaces.

The undo traffic-optimize bcmc unicast-send mismatch-action drop command restores the default action, that is, send broadcast or multicast packets that fail to be converted into unicast packets on air interfaces to all users in unicast mode.

By default, if broadcast or multicast packets fail to be converted into unicast packets on air interfaces, the packets are discarded.

Format

traffic-optimize bcmc unicast-send mismatch-action drop

undo traffic-optimize bcmc unicast-send mismatch-action drop

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, if broadcast or multicast packets fail to be converted into unicast packets on air interfaces, the packets are discarded. To enable the system to sent these packets to all users, run the undo traffic-optimize bcmc unicast-send mismatch-action drop command.

Prerequisites

Example

# Configure the system to send the broadcast or multicast packets that fail to be converted into unicast packets on air interfaces to all users.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] undo traffic-optimize bcmc unicast-send mismatch-action drop
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124826

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next