No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
device synchronization-interval

device synchronization-interval

Function

The device synchronization-interval command sets the interval at which an AP reports all wireless device information.

The undo device synchronization-interval command restores the default interval at which an AP reports all wireless device information.

By default, an AP reports all wireless device information to an AC at an interval of 360 minutes.

Format

device synchronization-interval interval

undo device synchronization-interval

Parameters

Parameter

Description

Value

interval

Specifies the interval at which an AP reports all wireless device information.

The value is an integer that ranges from 120 to 360, in minutes.

Views

WIDS profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An AP reports wireless device information in the following modes:
  • Incremental reporting: The AP reports the added, changed, or deleted information to the AC in real time.
  • All information reporting: The AP periodically reports all wireless device information to the AC.

To ensure that detected device information is consistent on the AP and AC, run the device synchronization-interval command to enable the AP to periodically synchronize wireless device information to the AC.

Prerequisites

The device detection function has been enabled using the wids device detect enable command for the AP.

Example

# Set the interval at which an AP reports all wireless device information to 120 minutes.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name office
[HUAWEI-wlan-ap-group-office] radio 0
[HUAWEI-wlan-group-radio-office/0] wids device detect enable
[HUAWEI-wlan-group-radio-office/0] quit
[HUAWEI-wlan-ap-group-office] quit
[HUAWEI-wlan-view] wids-profile name office
[HUAWEI-wlan-wids-prof-office] device synchronization-interval 120
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123054

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next