No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize multicast-unicast dynamic-adaptive disable

traffic-optimize multicast-unicast dynamic-adaptive disable

Function

The traffic-optimize multicast-unicast dynamic-adaptive disable command disables adaptive multicast-to-unicast conversion in a traffic profile.

The undo traffic-optimize multicast-unicast dynamic-adaptive disable command enables adaptive multicast-to-unicast conversion in a traffic profile.

By default, adaptive multicast-to-unicast conversion is enabled in a traffic profile.

Format

traffic-optimize multicast-unicast dynamic-adaptive disable

undo traffic-optimize multicast-unicast dynamic-adaptive disable

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After adaptive multicast-to-unicast conversion is enabled, when the air interface performance becomes a bottleneck during multicast-to-unicast conversion, an AP automatically switches the multicast group containing the minimum number of STAs to the multicast mode. After the air interface performance is improved and keeps being improved for a period of time, the AP automatically switches the multicast group containing the maximum number of STAs to the unicast mode. In this way, the air interface performance is automatically adjusted without manual intervention, improving wireless user experience.

Pre-configuration Tasks

The multicast-to-unicast conversion function has been enabled in the traffic profile using the traffic-optimize multicast-unicast enable command.

Example

# Disable adaptive multicast-to-unicast conversion in traffic profile p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize multicast-unicast enable
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize multicast-unicast dynamic-adaptive disable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114354

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next