No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mobility-server local

mobility-server local

Function

The mobility-server local command configures a local IP address for setting up links between ACs in a mobility group.

The undo mobility-server local command deletes the local IP address for setting up links between ACs in a mobility group.

By default, no local IP address is configured for setting up links between ACs in a mobility group.

Format

mobility-server local ip-address ipv4-address

undo mobility-server local

Parameters

Parameter

Description

Value

ip-address ipv4-address

Specifies an IPv4 address for setting up links between ACs in a mobility group.

The value is in dotted decimal notation.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In inter-AC roaming scenarios, you need to specify a local IP address for STAs to roam between ACs.

Precautions

The specified IP address must be the same as the CAPWAP source IP address. When multiple CAPWAP source addresses are configured, only one can be specified as the local IP address for setting up links between ACs.

Example

# Configure 192.168.10.1 as the local IP address for setting up links between ACs in a mobility group.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] mobility-server local ip-address 192.168.10.1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116966

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next