No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap neighbor

display ap neighbor


The display ap neighbor command displays information about neighbors of a radio, including authorized and unauthorized neighbors.


display ap neighbor { ap-name ap-name | ap-id ap-id } [ radio radio ]





ap-name ap-name

Specifies an AP name.

The AP name must exist.

ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

radio radio

Specifies radio ID of an AP.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.


All views

Default Level

1: Monitoring level

Usage Guidelines

Use Scenario

APs' neighbor information reflects the APs' locations and neighbor relationships, helping you plan the network.

If a neighboring AP is an authorized one, the system displays the power of signals received from the neighboring AP as well as the path loss.

If a neighboring AP is an unauthorized one, the system displays only the power of signals received from the neighboring AP.


The radio calibration function has been enabled using the calibrate enable { auto | manual | schedule time } command.


In auto radio calibration mode, APs continuously report and update neighboring information so that the AC can query the latest AP neighbor information. In manual or scheduled radio calibration mode, APs report neighbor information within the calibration period. Neighbor information ages out after 1 hour and can be queried only before aging.


# Display neighbor information of AP huawei.

<HUAWEI> display ap neighbor ap-name huawei
Radio: Radio ID of AP 
In control AP: 
Radio AP ID AP name         Channel  Received RSSI(dbm)  Path loss(db) 
0     0     e468-a352-7990  1        -38                 56 
Total: 1 

Uncontrol AP:
Radio  BSSID          Channel  RSSI(dBm)  SSID
0      0020-1306-0680 1        -79        b
1      cc53-b5ee-3d00 5        -60        test
Total: 2
Table 11-18  Description of the display ap neighbor command output



In control AP

Authorized neighboring AP.

Uncontrol AP

Unauthorized neighboring AP.


Neighboring AP detected on an AP radio.


ID of a neighboring AP.

AP name

Name of a neighboring AP.


Channel that the authorized neighboring AP uses.


The device displays only information about neighboring APs detected on the current channel.

Received RSSI(dbm)

Strength of signals received from neighboring APs.

Path loss(db)

Path loss.


Basic service set identifier (BSSID) of an unauthorized neighbor.


Channel that the unauthorized neighboring AP uses.


Power of signals received from the neighboring AP, in dBm.


Service set identifier (SSID) of an unauthorized neighbor.

Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 143171

Downloads: 92

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next