No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap coordinate

display ap coordinate

Function

The display ap coordinate command displays information about longitudes and latitudes of APs.

Format

display ap coordinate { all | ap-group ap-group-name }

Parameters

Parameter

Description

Value

all

Displays information about longitudes and latitudes of all APs.

-

ap-group ap-group-name

Displays information about longitudes and latitudes of APs in the specified AP group.

The AP group must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view longitudes and latitudes of APs.

Example

# Display information about longitudes and latitudes of all APs.

<HUAWEI> display ap coordinate all
---------------------------------------------------------------------------------------------------------
ID   Name             Group      Longitude            Latitude
---------------------------------------------------------------------------------------------------------
0    00d5-ada8-1c00   default    30.1111111°E        40.2222222°N 
1    244c-075f-ec20   default    110°59′59"W         77°25′53″N
2    644c-075f-ec20   default    -                    -
--------------------------------------------------------------------------------------------------------
Total: 3
Table 11-11  Description of the display ap coordinate all command output

Item

Description

ID

AP ID.

Name

AP name.

Group

AP group.

Longitude

Longitude of an AP. Its display varies depending on the format:
  • Example: 114°3′14″E in the format of degree/minute/second
  • Example: 114.3435°E in the format of decimal degree
  • Hyphen (-) if it is not configured

Latitude

Latitude of an AP.
  • Example: 114°3′14″S in the format of degree/minute/second
  • Example: 114.3435°S in the format of decimal degree
  • Hyphen (-) if it is not configured
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126433

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next