No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
high-density amc-optimize enable

high-density amc-optimize enable

Function

The high-density amc-optimize enable command enables the adaptive modulation and coding (AMC) optimization function in high-density scenarios.

The undo high-density amc-optimize enable command disables the AMC optimization function in high-density scenarios.

By default, the AMC optimization function is disabled in high-density scenarios.

Format

high-density amc-optimize enable

undo high-density amc-optimize enable

Parameters

None

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In typical high-density scenarios, a large number of hidden nodes exist, which interfere in communication between APs and STAs and affect product performance. The AMC optimization function can reduce such interference and improve the AMC algorithm performance.
  • It is recommended that this function be enabled in high-density scenarios where directional antennas are used.
  • This function is not applicable to scenarios where STAs move fast between APs.

Precautions

  • This takes effect only on APs in compliance with 802.11ac Wave 2.
  • This function does not take effect in MU-MIMO mode.

Example

# Enable the AMC optimization function in high-density scenarios on the RRM profile default.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] high-density amc-optimize enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116149

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next