No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance dynamic channel-utilization gap-threshold

sta-load-balance dynamic channel-utilization gap-threshold

Function

The sta-load-balance dynamic channel-utilization gap-threshold command sets the channel utilization difference threshold for load balancing in a dynamic load balancing group.

The undo sta-load-balance dynamic channel-utilization gap-threshold command restores the default channel utilization difference threshold for load balancing in a dynamic load balancing group.

By default, the channel utilization difference threshold for load balancing in a dynamic load balancing group is 20%.

Format

sta-load-balance dynamic channel-utilization gap-threshold gap-threshold

undo sta-load-balance dynamic channel-utilization gap-threshold

Parameters

Parameter

Description

Value

gap-threshold gap-threshold

Specifies the channel utilization difference threshold for load balancing in a dynamic load balancing group.

The value is an integer that ranges from 1 to 99, in percentage.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When dynamic load balancing based on the channel usage is implemented, an AC calculates the channel usage of each member in a dynamic load balancing group. The AC then compares the channel usage values of all members in the dynamic load balancing group and obtains the smallest channel usage value. When a STA requests to associate with an AP radio, the AC calculates the difference between the radio's channel usage and the smallest channel usage value, and compares this difference with the specified threshold. If the difference is smaller than the threshold, the AC allows the STA to associate with the radio. If not, the AC performs dynamic load balancing calculation and allows the STA to associate with the radio with a lower load.

Example

# Set the channel usage difference threshold for load balancing in the dynamic load balancing group to 30%.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] sta-load-balance dynamic channel-utilization gap-threshold 30
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113196

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next