No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
card

card

Function

The card command displays the IoT card interface view.

Format

card { card-number | usb }

Parameters

Parameter

Description

Value

card-number

Specifies the IoT card interface number.

The value is an integer that ranges from 1 to 3.

usb

Specifies the USB interface of an IoT card.

-

Views

AP group view, AP specific view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the communication parameters are configured between an AP and an IoT card, and between an AP and a host computer, you need to bind corresponding configuration profiles in the IoT card interface view to make the parameters take effect.

Prerequisites

The USB function of the AP has been enabled using the usb enable command.

Precautions

Only the AP2050DN, AP2050DN-E, AP2050DN-S, AP2051DN, AP2051DN-E, AP2051DN-S, AP4030TN, AP4050DN-E, AP4051DN, AP4051DN-S, AP4051TN, AP4151DN, AP5050DN-S, AP6050DN, AP6052DN, AP6150DN, AP7050DE, AP7050DN-E, AP7052DE, AP7052DN, WA375DD-CE, AP7060DN, AP7152DN, R250D-E, and R251D-E support IoT cards connected to USB interfaces.

IoT cards of the cas-edu type do not support the USB interface.

Example

# Display the IoT card interface view.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] card 1
[HUAWEI-wlan-group-card-group1/1]
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123860

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next