No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mld-snooping enable (traffic profile view)

mld-snooping enable (traffic profile view)


The mld-snooping enable command enables MLD snooping in a traffic profile.

The undo mld-snooping enable command disables MLD snooping in a traffic profile.

By default, MLD snooping is disabled in a traffic profile.


mld-snooping enable

undo mld-snooping enable




Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the mld-snooping enable command to enable MLD snooping in a traffic profile.

After you disable MLD snooping in a traffic profile using the undo mld-snooping enable command, all MLD snooping configurations in the traffic profile are deleted. When you run the mld-snooping enable command to enable MLD snooping again, all MLD snooping configurations are restored to the default settings in the traffic profile.


A traffic profile has been created.

Before enabling MLD snooping in a traffic profile, run the sta-ipv6-service enable commands to enable the function of processing STA IPv6 services in the WLAN view.


# Enable MLD snooping in traffic profile p1.
<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] mld-snooping enable
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 128108

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next