No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
source (location profile view)

source (location profile view)

Function

The source command sets the source IP address used by the AC to send packets to a location server.

The undo source command deletes the configured source IP address.

By default, the source IP address used by the AC to send packets to a location server is not configured.

Format

source ip-address ip-address

undo source

Parameters

Parameter

Description

Value

ip-address ip-address

Specifies the source IPv4 address used by the AC to send packets to a location server.

The value is in dotted decimal notation.

Views

Location profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the source IP address used by the AC to send packets to a location server is configured using the source command, the UDP packet sent from the AC to a location server carries this IP address as its source IP address.

Precautions

  • Ensure that the AC IP address manually configured on a location server is the same as that configured using the source command.
  • The source IP address must be a valid IP address existing on the device; otherwise, the configuration does not take effect.
  • In scenarios where Huawei proprietary terminal location protocols are used, the AC uses the source IP address of the CAPWAP tunnel to send packets to a location server. The source IP address specified by the source command does not take effect.

Example

# Configure the source IP address of the UDP packets sent from the AC to a location server as 10.102.25.23.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] location-profile name huawei
[HUAWEI-wlan-location-prof-huawei] source ip-address 10.102.25.23
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126472

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next