No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ac protect enable

ac protect enable

Function

The ac protect enable command enables dual-link backup globally and disables N+1 backup.

The undo ac protect enable command disables dual-link backup globally and enables N+1 backup.

By default, dual-link backup is disabled globally, and N+1 backup is enabled.

Format

ac protect enable

undo ac protect enable

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To ensure service stability, an AP needs to establish connections with two ACs. The two ACs work in active/standby mode. The active AC provides services for APs, whereas the standby AC is a backup to the active AC.

Follow-up Procedure

After dual-link backup or N+1 backup is enabled globally, configure the AC priority and standby AC IP address to implement dual-link backup or N+1 backup.

Precautions

Ensure that active and standby ACs deliver the same WLAN service configuration to an AP that connects to the two ACs.

Example

# Enable dual-link backup globally and disable N+1 backup.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ac protect enable
Warning: This operation maybe cause AP reset, continue?[Y/N]:y
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126388

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next