No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize broadcast-suppression disable (AP system profile view)

traffic-optimize broadcast-suppression disable (AP system profile view)

Function

The traffic-optimize broadcast-suppression disable command disables rate limit for broadcast and multicast packets on an AP.

The undo traffic-optimize broadcast-suppression disable command enables rate limit for broadcast and multicast packets on an AP.

By default, rate limit for broadcast and multicast packets is enabled on an AP.

Format

traffic-optimize broadcast-suppression { all | arp | igmp | nd | dhcp | dhcpv6 | mdns | other-broadcast | other-multicast } disable

undo traffic-optimize broadcast-suppression { all | arp | igmp | nd | dhcp | dhcpv6 | mdns | other-broadcast | other-multicast } disable

Parameters

Parameter

Description

Value

all

Indicates whether to enable rate limit for ARP, DHCP, DHCPv6, IGMP, mDNS, and ND multicast and broadcast packets.

-

arp

Indicates whether to enable rate limit for ARP multicast packets.

-

igmp

Indicates whether to enable rate limit for IGMP multicast packets.

-

nd

Indicates whether to enable rate limit for ND broadcast packets.

-

dhcp

Indicates whether to enable rate limit for DHCP broadcast packets.

-

dhcpv6

Indicates whether to enable rate limit for DHCPv6 broadcast packets.

-

mdns

Indicates whether to enable rate limit for mDNS multicast packets.

-

other-broadcast

Indicates whether to enable rate limit for broadcast packets other than ARP, DHCP, DHCPv6, and ND packets.

-

other-multicast

Indicates whether to enable rate limit for multicast packets other than IGMP and mDNS packets.

-

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

A large number of packets on a device occupy many network resources, affecting network services. To ensure normal running of network services, you can limit the rate of packets of some protocols (such as DHCP and ARP) on APs with a proper range.

The default rate threshold of broadcast and multicast packets of an AP is 256 pps. You can also run the traffic-optimize broadcast-suppression rate-threshold (AP system profile view) command to configure a rate threshold for broadcast and multicast packets , which will override the default rate threshold.

Precautions

When multicast services are enabled, the multicast services may be affected if rate limit for multicast packets is enabled on an AP. In this case, you are advised to run the traffic-optimize broadcast-suppression rate-threshold (AP system profile view) command to adjust the rate limit threshold for multicast packets.

Example

# Enable rate limit for ARP broadcast packets in AP system profile system1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-system-profile name system1
[HUAWEI-wlan-ap-system-prof-system1] undo traffic-optimize broadcast-suppression arp disable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 117281

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next