No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
security-profile (wlan view)

security-profile (wlan view)

Function

The security-profile command creates a security profile or enters the security profile view.

The undo security-profile command deletes a security profile according to the ID or name.

By default, security profiles default, default-wds, and default-mesh are available in the system.

Format

security-profile name profile-name

undo security-profile { all | name profile-name }

Parameters

Parameter

Description

Value

name profile-name

Specifies the name of a security profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

all

Deletes all security profiles.

NOTE:
Security profiles default, default-wds, and default-mesh cannot be deleted.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

You can run this command to configure access security. A security profile must be configured before you specify an authentication mode in the profile. To delete a security profile, run the undo security-profile command.

The system configures the new profile, the default value is no authentication and no encryption.

Example

# Configure a security profile named p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] security-profile name p1
[HUAWEI-wlan-sec-prof-p1]
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126301

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next