No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap-card all

display ap-card all

Function

The display ap-card all command displays brief information about cards on all the APs.

Format

display ap-card all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

To query brief information about cards on all the APs, run the display ap-card all command.

No result is displayed for a card if it does not support query.

Example

# Display brief information about cards on all the APs.

<HUAWEI> display ap-card all
Connected-status: The match status indicates that the card connection type matches that on the device. Otherwise, mismatch is displa
yed. To modify the effective connection type, run the card connect-type {serial|ethernet} command.
Frame-version: Frame format on extended interfaces. 
---------------------------------------------------------------------------------------------------------------------------------------
----------------------
AP ID  Card-number  Wireless-standard  Vendor-name  Card-type      Card-connect-type  Connected-status  Baud-rate  Frame-version  Se
rial-number
---------------------------------------------------------------------------------------------------------------------------------------
----------------------
2      1            RFID               ENJOYOR      TOEAPV1.2      ethernet(up)       match             9600       2.0            00
00000000000001
---------------------------------------------------------------------------------------------------------------------------------------
----------------------
Total: 1
Table 11-267  Description of the display ap-card all command output

Item

Description

AP ID

AP ID.

Card-number

Card ID.

Wireless-standard

Wireless protocol supported by a card. The value is a 10-byte ASCII character set, for example, RFID, ANT, ZigBee, BT4.0, and Weightless.

Vendor-name

Vendor code. The value is an 8-byte ASCII character set, for example, ENJOYOR.

Card-type

Card model. The value is a 12-byte ASCII character set, for example, TOEAPV1.2.

Card-connect-type Connection type between the IoT card and AP.
Connected-status Whether the actual connection type of an IoT card matches the current initialized connection type of the AP.
Baud-rate Baud rate for communication between the card and AP.
Frame-version Frame format of an extension interface.

Serial-number

Module ID of the card. The value is a 16-byte BCD character set.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115070

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next