No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ble low-power-threshold

ble low-power-threshold

Function

The ble low-power-threshold command sets a low power alarm threshold for BLE devices or Bluetooth tags.

The undo ble low-power-threshold command restores the low power alarm threshold of BLE devices or Bluetooth tags to the default value.

By default, the low power alarm threshold of BLE devices or Bluetooth tags is 20%.

Format

ble low-power-threshold low-power-threshold

undo ble low-power-threshold

Parameters

Parameter Description Value
low-power-threshold Specifies the low power alarm threshold of BLE devices or Bluetooth tags. The value is an enumerated type. The options are as follows:
  • 0: 0%
  • 20: 20%
  • 40: 40%
  • 60: 60%
  • 80: 80%

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

After the sniffer enable command is executed to enable the Bluetooth monitoring or Bluetooth tag location function of an AP's built-in Bluetooth module, the built-in Bluetooth module will scan and obtain information about surrounding BLE devices or Bluetooth tags. The information includes battery power of BLE devices or Bluetooth tags. When the obtained battery power of a BLE device or Bluetooth tag is lower than the low power alarm threshold, the AC generates an alarm indicating that the BLE device or Bluetooth tag has low battery power.

Example

# Set the low power alarm threshold for BLE devices or Bluetooth tags to 40%.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ble low-power-threshold 40
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127692

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next