No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap card

display ap card

Function

The display ap card command displays details about AP cards.

Format

display ap ap-id card { all | card-number | usb }

Parameters

Parameters

Description

Value

ap-id

Specifies the AP ID.

The AP ID must exist.

all

Specifies all AP cards.

-

card-number

Specifies the number of an interface on an IoT card.

The interface number must exist.

usb

Specifies the USB interface on an IoT card.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

You can run this command to query details about AP cards.

Example

# Display details about AP cards.

<HUAWEI> display ap 0 card all
Connected-status: The match status indicates that the card connection type matches   
that on the device. Otherwise, mismatch is displayed. To modify the effective connection  
type, run the card connect-type {serial|ethernet} command and restart the device.
-------------------------------------------------------------------------------- 
 Card                     : 1 
-------------------------------------------------------------------------------- 
 IOT card status          : absent 
-------------------------------------------------------------------------------- 
 Card                     : 2 
-------------------------------------------------------------------------------- 
 IOT card status          : present 
 Card connect type        : Serial
 Connected status         : mismatch
 Support card information : YES 
 Protocol version         : 1 
 Wireless standard        : RFID 
 Frequency                : 433M 
 Vendor name              : ENJOYOR 
 Card type                : TOEAPV1.2 
 Hardware version         : VA 
 Firmware version         : 0.1.0.1 
 Card serial number       : 0000000000000001 
 Baud-rate                : 115200
 Frame-version            : 1.0
-------------------------------------------------------------------------------- 
 Card                     : 3 
-------------------------------------------------------------------------------- 
 IOT card status          : absent 
-------------------------------------------------------------------------------- 
 Card                     : usb
-------------------------------------------------------------------------------- 
 USB status               : disabled
 IOT card status          : absent 
-------------------------------------------------------------------------------- 
Table 11-265  Description of the display ap card command output

Item

Description

IOT card status

Card status.

  • Present: An IoT card is installed.
  • absent: No IoT card is installed.
Card connect type Connection type between the IoT card and AP.
Connected status Whether the actual connection type of an IoT card matches the current initialized connection type of the AP.

Support card information

Whether card information can be queried.

Protocol version

Protocol version. The current version number is 1.

Wireless standard

Wireless protocol supported by a card. The value is a 10-byte ASCII character set, for example, RFID, ANT, ZigBee, BT4.0, and Weightless.

Frequency

Card frequency. The value is an 8-byte ASCII character set, for example, 2.4G, 900M, 2.4/5G, and any value from 433M to 915M.

Vendor name

Vendor code. The value is an 8-byte ASCII character set, for example, ENJOYOR.

Card type

Card model. The value is a 12-byte ASCII character set, for example, TOEAPV1.2.

Hardware version

Hardware version of the card. The value is a 2-byte ASCII character set. The value is fixed in the following pattern: VA for the first version, VB for the second version, VC for the third version, and so on.

Firmware version

Firmware version of the card. The value is a 4-byte number, for example, 00.01.00.01.

Card serial number

Module ID of the card. The value is a 16-byte BCD character set.

Baud-rate Baud rate for serial communication on an IoT card slot.
Frame-version Frame format of an extension interface.
USB status

Actual working status of the USB function on an AP.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 125963

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next