No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
temporary-management psk

temporary-management psk

Function

The temporary-management psk command configures the password for an offline management VAP or antenna alignment VAP.

The undo temporary-management psk command restores the default password of an offline management VAP or antenna alignment VAP.

The default password of an offline management VAP or antenna alignment VAP is hw_manage.

Format

temporary-management psk psk-value

undo temporary-management psk

Parameters

Parameter

Description

Value

psk-value

Specifies the password for an offline management VAP or antenna alignment VAP.

The value is a string of 48 to 108 characters in ciphertext or a string of 8 to 63 characters in plaintext. The password must contain at least two types of uppercase letters, lowercase letters, digits, and special characters.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Using the default password of an offline management VAP or antenna alignment VAP poses security risks. You can run the temporary-management psk command to change the default password.

Example

# Configure the password for an offline management VAP as a1234567.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] temporary-management psk a1234567
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 122970

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next