No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mesh-neighbor-rssi

display mesh-neighbor-rssi

Function

The display mesh-neighbor-rssi command displays RSSI information collected by an AP.

Format

display mesh-neighbor-rssi [ ap-name ap-name radio radio-id | ap-id ap-id radio radio-id ] [ max-neighbor-number max-number ]

Parameters

Parameter

Description

Value

ap-name ap-name

Displays RSSI information collected by the AP with a specified name.

If this parameter is not specified, RSSI information collected by all APs is displayed.

The AP name must exist.

ap-id ap-id

Displays RSSI information collected by the AP with a specified ID.

If this parameter is not specified, RSSI information collected by all APs is displayed.

The AP ID must exist.

radio radio-id

Displays RSSI information collected by a specified radio.

The radio ID must exist.

max-neighbor-number max-number

Specifies the maximum number of neighboring APs of which RSSI information collected by the AP can be displayed.

If this parameter is not specified, RSSI information of all neighboring APs collected by the AP is displayed.

The value is an integer that ranges from 1 to 256.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command applies only to APs on a Mesh network. A local AP can collect RSSI information of a neighboring AP only when the neighboring AP and local AP are added to Mesh whitelists of each other.

Example

# Display RSSI information collected by all APs.

<HUAWEI> display mesh-neighbor-rssi
Info: This operation may take a few seconds, please wait.done. 
AP name/MAC/Radio/Location-ID  Neighbor AP/MAC/Location-ID  RSSI  Update Time   
--------------------------------------------------------------------------------
area_1/60de-4476-e360/0/1      -/dcd2-fc21-5d40/-           -43   20:55:16      
--------------------------------------------------------------------------------
Total: 1
Table 11-235  Description of the display mesh-neighbor-rssi command output
Item Description

AP name/MAC/Radio/Location-ID

Name, MAC address, radio ID, and location ID of the local AP.

NOTE:

If APs are named based on their locations, this field displays as AP name/MAC/Radio/Location-ID; otherwise, this field displays as hyphen (-).

Neighbor AP/MAC/Location-ID

AP name, MAC address, and location ID of a neighboring AP.

NOTE:

If APs are named based on their locations, this field displays as AP name/MAC/Radio/Location-ID; otherwise, this field displays as hyphen (-).

RSSI

RSSI of a neighboring AP.

Update Time

Time when RSSI information is collected.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124376

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next