No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
beacon-2g-rate

beacon-2g-rate

Function

The beacon-2g-rate command sets the transmit rate of 2.4 GHz Beacon frames.

The undo beacon-2g-rate command restores the default transmit rate of 2.4 GHz Beacon frames.

By default, the transmit rate of 2.4 GHz Beacon frames is 1 Mbit/s.

Format

beacon-2g-rate beacon-2g-rate

undo beacon-2g-rate

Parameters

Parameter Description Value
beacon-2g-rate Specifies the transmit rate of Beacon frames.
Enumerated type:
  • 1: 1 Mbit/s
  • 2: 2 Mbit/s
  • 5.5: 5.5 Mbit/s
  • 6: 6 Mbit/s
  • 9: 9 Mbit/s
  • 11: 11 Mbit/s
  • 12: 12 Mbit/s
  • 18: 18 Mbit/s
  • 24: 24 Mbit/s
  • 36: 36 Mbit/s
  • 48: 48 Mbit/s
  • 54: 54 Mbit/s

Views

SSID profile view, WDS profile view, Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In high-density wireless scenarios, too many Beacon frames occupy a large number of wireless resources. To reduce wireless resource occupation of Beacon frames and improve channel usage efficiency, you can run the beacon-2g-rate command to set a large transmit rate for 2.4 GHz Beacon frames.

Precautions

Modifying the transmit rate of Beacon frames will affect the association experience of STAs. Exercise caution when running the command.

The 802.11b protocol supports only 1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, and 11 Mbit/s. If you set the transmit rate of Beacon frames to a rate not supported by the 802.11b protocol, STAs supporting only 802.11b cannot connect to the wireless network.

If you run the radio-type dot11b command in the 2G radio profile view to set the radio type to dot11b, and the 2G radio profile is applied to an AP, beacon-2g-rate that takes effect on the 2 GHz radio of the AP is fixed as 1 Mbps, and beacon-2g-rate configured in the SSID profile view does not take effect on the AP.

Example

# Set the transmit rate of 2.4 GHz Beacon frames to 18 Mbit/s in the SSID profile ssid1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ssid-profile name ssid1
[HUAWEI-wlan-ssid-prof-ssid1] beacon-2g-rate 18
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115446

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next