No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display references mesh-handover-profile

display references mesh-handover-profile

Function

The display references mesh-handover-profile command displays information about Mesh profiles by which a specified Mesh handover profile is referenced.

Format

display references mesh-handover-profile name profile-name

Parameters

Parameter

Description

Value

name profile-name

Displays information about the Mesh profiles by which a specified Mesh handover profile is referenced.

The Mesh handover profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display references mesh-handover-profile command to check the Mesh profiles by which a Mesh handover profile is referenced.

Example

# Display information about Mesh profiles by which the Mesh handover profile test is referenced.

<HUAWEI> display references mesh-handover-profile name test
--------------------------------------------------------------------------------
Reference type                  Reference name                                  
--------------------------------------------------------------------------------
Mesh profile                    profile-1                                       
Mesh profile                    profile-2                                       
--------------------------------------------------------------------------------
Total: 2     
Table 11-236  Description of the display references mesh-handover-profile command output

Item

Description

Reference type

Type of the profile by which a Mesh handover profile is referenced.

A Mesh handover profile can only be referenced by a Mesh profile.

Reference name

Name of the profile by which a Mesh handover profile is referenced.

To bind a Mesh handover profile to a Mesh profile, run the mesh-handover-profile (Mesh profile view) command in the Mesh profile view.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127775

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next